Site Information

loading please wait Loading... Please wait...


Epoxy Surface Preparation for the 5 Most Common Countertop Surfaces

Posted by Juliana Mendoza on

While our Premium Clear FX Poxy can go over just about any surface, it’s extremely important to know the proper preparation needed for your substrate before applying the product. Be Laminate/Formica, granite or tile countertops, each requires proper preparation to ensure adhesion and achieve that flawless finish.

The five most popular countertops our customers resurface are Laminate, Formica, Granite, Concrete, Wood and tile countertops.


Laminate countertops and Formica, which is a brand name of laminate countertops, are made from layers of plastic that are bonded to particle board or Kraft paper to create a solid countertop surface.


Our Premium Clear FX Poxy can be poured directly over this substrate without any extensive preparation. The recommended prep is to ensure the surface is thoroughly cleaned of any debris, dust or oils. Specially a countertop which encounters constant cooking and heavy daily use, making sure any oil residue is thoroughly cleaned off is vital. If any dust, debris, oil (or silicone) residue is left behind, it can result in the epoxy not adhering properly in certain areas resulting in fish eyes, divots or areas where the epoxy will not flow or adhere. To ensure no residue is left on the surface we would recommend cleaning your surface with 91% isopropyl alcohol.

Granite, Concrete, Wood Countertops

Granite, concrete and wood are porous substrates that require an additional step before epoxy application.


To properly prepare a porous surface for epoxy application, it is recommended to thoroughly clean the surface and seal it by skim coating. Skim coating seals the surface and prevents your substrate from soaking up the epoxy and air bubbles from forming during your flood pour. The skim coat is a very thin layer of epoxy that you’ll apply to your entire surface and can be applied with a brush or spread out with a squeegee. For an average countertop (40-50 sq. ft) it usually takes less than a quart of epoxy to apply, as you’re just ensuring it’s thinly coated to seal in the substrate. Once the skim coat is applied, let it cure for at least 6 hours minimum. When no longer tacky you are ready to apply your flood pour of epoxy.
*Depending on porosity of the surface, may require a few skim coats to thoroughly seal.

Tile Countertops

With tile countertops comes grout lines. Grout lines are extremely porous and it’s necessary to seal them in before epoxy application. If not properly sealed, the grout lines can soak up the epoxy and result in grout line impressions. Tile can also be porous and may have had a previous sealant applied that the epoxy may not react well to, thoroughly cleaning the tile countertop surface with 91% isopropyl alcohol is recommended before application to remove any residue.


To properly prepare tile countertops, you’ll want to thoroughly clean the surface with 91% isopropyl alcohol and apply a skim coat to the entire surface, primarily focusing on the grout lines. Depending on porosity, it may require a few skim coats. As mentioned previously, once the skim coat is applied, let it cure for 6 hours minimum and when no longer tacky you are ready to apply your flood pour.

You may have a question after reading the preparation and thinking “Do I need to sand the surface?

Sanding is not a requirement for surface preparation, however you can rough it up a bit by lightly sanding the surface with 220-320 grit sand paper to further ensure adhesion of our product. Specially in cases where there was a previous sealant applied. In other terms, taking that extra step to sand the surface won’t hurt.

Another question you may have is about priming the countertop. Priming the countertop is not necessary. The only priming we’d recommend is when you’re applying epoxy with a base color drastically different from your substrate. You’ll want to prime just the vertical edges with the same FX Prime Coat Color that you’d use for your base color with the epoxy. The epoxy will naturally pull thinner on the edges and this step ensures no underlying color will peak through.

When priming your edges, you do want to make sure the primed edge is completely dry before pouring your epoxy.

When going into your next epoxy countertop resurface, consider the surface preparation you’ll need. It truly can make a difference between an application succeeding or failing.

We would also highly recommend reading our previous blog posts for more informative tips to help you along with your epoxy application.

Vertical Edges and Surface Coating Tips

The 5 Most Common Mistakes DIYers Make When Installing Epoxy Countertops 

How to Properly Torch Your Epoxy Countertop

Also check out our informative YouTube tutorial video covering the epoxy application process:

How To: Epoxy Kitchen Countertop

If unsure about a certain countertop and the preparation needed, please give our office a call and we'll be more than happy to assist you with your questions. 970.639.9338 Our office hours are Monday through Friday, 8am to 6pm Mountain Standard Time. 

Epoxy Vertical Edges & Surface Coating Tips

Are you finding yourself with uneven epoxy vertical edges? Can’t seem to efficiently spread out the product on your countertop surface? When it comes to epoxy application, your technique and vertical surface tension should be one of your main focuses, and is vital in attaining that perfect, flawless finish for your epoxy countertop.Watch corresponding Video for this blog Below.Vertical [...]

Read More »

How to Touch Up Your Epoxy Counterop

Not every epoxy countertop installation goes according to plan, and there are times where you may need to touch up some small mistakes. Whether your issue was with your design, or a divot, or you had a bug land in your epoxy (this happens more than you would think) there is a solution!We are going to categorize a [...]

Read More »

Why Do I Have Dents or Divots In My Epoxy Countertop?

There are two different scenarios where you could see dents form in your epoxy countertop. The first, would be immediately after pouring the epoxy, there are dents or divots in the otherwise glossy smooth surface. The second scenario, would be a soft countertop where indentations are left from any heavy item. So, why would the epoxy divot like this [...]

Read More »

How to Properly Torch Your Epoxy Countertop

When you install your own epoxy countertop it is important to know how to properly use a propane torch. After you pour out the epoxy, odds are that there will be some bubbles that were mixed in while combining the resin and hardener. To remove these bubbles from the surface of the countertop, we recommend a propane torch. The [...]

Read More »

​How to Update Your Kitchen Cabinets

Are you tired of those oak cabinets in your kitchen? Even if you are a renter or have no DIY experience, we have some ideas that are sure to help you create the kitchen of your dreams, starting with your cabinets! We will take a look at using contact paper, epoxy, stain, and paint and how others [...]

Read More »

How to Design an Epoxy Countertop to Look Like a Stone Countertop

Do you have a laminate countertop that you wish that you could replace with a marble, granite, or slate countertop instead? You can resurface your existing countertop to look like the stone countertop of your dreams with epoxy. We are always interested in recreating natural patterns in our work, from wood grain to a white [...]

Read More »

​How Much Epoxy Do I Need to Cover My Floor, Countertop, or Wall?

Whether you are looking to create an epoxy countertop, floor, or wall (yes, you can epoxy your wall!) we can help you with knowing the exact amount of epoxy you will need for your project.Most epoxy companies recommend pouring their epoxy at 10 mill thickness. To increase the durability and longevity of our epoxy, we [...]

Read More »

11 DIY Ideas to Update Your Ugly Rental Kitchen

Are you ready to upgrade your ugly rental kitchen? While making permanent changes might not be possible, we do have some ideas to transform your space! Just because you don't own a place, it doesn't mean that you can't make it your own. We have divided our ideas into three categories including: Non-Permanent, Semi-Permanent, and [...]

Read More »

The 5 Most Common Mistakes DIYers Make When Installing Epoxy Countertops

For many DIYers, the first time they resurface their countertops with epoxy they can run into easily avoidable issues. Our technical support team has come up with the 5 most common mistakes made during epoxy countertop installations and how to avoid them. Ultimately, the best advice we can give you is to follow the instructions, and [...]

Read More »